What to do if GFCI is triggered on Worx Pressure Washer?
- DDouglas PerezJul 28, 2025
If the GFCI is triggered on your Worx Pressure Washer, press the reset button located on the GFCI plug.

What to do if GFCI is triggered on Worx Pressure Washer?
If the GFCI is triggered on your Worx Pressure Washer, press the reset button located on the GFCI plug.
What to do if water inlet adapter is clogged or dirty in Worx WG604?
If the water inlet adapter on your Worx Pressure Washer is clogged or dirty, remove it, rinse it with water, and then reattach it.
What to do if there is a leak or kink in Worx WG604 hose?
If you have a leak or kink in the hose of your Worx Pressure Washer, replace the hose or untie any kinks that are present.
How to remove air in line of Worx WG604 Pressure Washer?
If there is air in the line of your Worx Pressure Washer, remove the nozzle, turn on the machine for a short period, and then reinstall the nozzle.
| Brand | Worx |
|---|---|
| Model | WG604 |
| Category | Pressure Washer |
| Language | English |
Read all safety warnings and instructions before operating to prevent injury.
Product may expose you to chemicals known to cause cancer or reproductive harm.
Explains GFCI protection and servicing requirements for double-insulated appliances.
Use appropriate, undamaged outdoor extension cords with correct gauge and rating.
Lists all parts included with the pressure washer, referencing figures for identification.
Step-by-step instructions for assembling the pressure washer components.
Connect water supply, power, and set the ON/OFF switch before operating.
Instructions on how to test the Ground Fault Circuit Interrupter (GFCI) plug for safety.
Choose the correct nozzle for different cleaning tasks and surfaces for optimal performance.
How to perform cleaning tasks, including adding and adjusting detergent dosage.
Guidance on winding and unwinding the high-pressure hose using the integrated reel.
Always disconnect power before performing any adjustment, servicing, or maintenance.
Inspect the power cord and pump for damage or leaks regularly; contact service if issues arise.
Remove and clean nozzles using the declogging needle and rinse with a garden hose.
Store the pressure washer in a frost-free area to prevent damage from freezing temperatures.