4. Wearsafetyglassesandbecarefulnotto
cutyourself.
5. Carefullyfilethecuttingedgesofthe
bladewithafinetoothfileM-3or
sharpeningstone.
6. Checkbalanceofblade.Seeinstructions
forbladebalancing.
7. Replacebladeonmowerandtighten
securely.Refertoinstructionsbelow.
BLADEBAL&NC|NG(SEE N)
Check balance of blade by placing center
hole in blade N-1 over a nail or screwdriver
shank N-2, clamped horizontally in a vise N-3.
If either end of the blade rotates downward,
file that end. Blade is properly balanced when
neither end drops.
BUU)I: MA|NTENANCE (SEE O & P)
Renew your metal blade after 50 hours
mowing or 2 years, which ever is the sooner-
regardless of condition.
Follow these procedures to remove and
replace the blade. You will need garden gloves
(not provided) and a spanner wrench (not
provided) to remove the blade. Hold the blade
(P-2) and unscrew the blade nut (P-5) counter-
clockwise using a spanner wrench. Remove
blade nut (P-5), square washer (P-4), insulator
washer (P-3), and blade (P-2).
To re-assemble, first position the blade
with the cutting edges towards the ground.
Assemble the components.
Ensure that the edges of the insulator washer
hook over the edge of the blade. Align the flats
on the square washer (P-4) with the flats on the
shaft.
Then securely tighten the blade nut.
NeTE: if the blade and insulator washer (P-3)
are cracked or damaged, replace with new
ones.
QFF SEASQH STORAGE
The mower may be stored with the charger
disconnected if all of the following conditions
are met.
1) The mower is fully charged before storing.
Recharge the battery twice a month to
increase the life of the battery.
2) The average temperature of the storage
location is below 50°F (10°C).
3) Storage duration is lessthan 6 months.
STOXAGr-(SEEQ)
Stop the mower and always remove the
safety key. Clean the exterior of the machine
thoroughly using a soft brush and cloth. Do
not use water, solvents or polishes. Remove
all grass and debris, especially from the
ventilation slots.
Turn the machine on its side and clean the
blade area. If grass cuttings are compacted
in the blade area, remove with a wooden or
plastic implement.
Store the machine in a dry place. Do not place
other objects on top of the machine.
To aid storage, press the handle height
adjustment knob, and rotate or fold the upper
handle.
WARRAMTY STATEMEMT
30 DAY Satisfaction Guarantee
If for any reason you are dissatisfied with any
WORX product, you can return the product,
along with proof of purchase, within 30 days
for a full refund.
If yourWORX product becomes defective due
to faulty materials or workmanship within the
specified warranty period of;
.24 months for DIY and light trade use, from
the date of purchase.
We guarantee to repair or replace all defective
parts free of charge, repair products subject
to fair wear and tear, free of charge, or at our
discretion, replace the unit free of charge
to ensure minimum inconvenience to the
customer.Your warranty is subject to the
following conditions:
* Proof of purchase date and a valid receipt is
produced.
*The product has not been misused.
*The product has not been used for
Professional purposes.
To Next Page
Loading...
Need help?
General
