Getting started
EN
18
• To select each digit of your PIN, use the arrow keys: ↑ for counting up (1, 2, 3...) and ↓ for counting down (9, 8, 7…)
• Press OK to confirm each digit of the PIN before selecting the next PIN code digit
• Once the four digits have been confirmed, the screen will display PIN 2
• Repeat the procedure for entering the new PIN
• If the two inputs match, the screen will display the new PIN
• If they don’t match, the screen will displayed the old PIN. Repeat the procedure to change it to a new PIN of your choice
Important: write down the PIN and keep it in a safe place. For extra security, register your Landroid and record your PIN on Worx
website. We will store it safely and you will always be able to retrieve it from the My Landroid section on the website.
Please note that in case you lose your PIN, you will not be able to operate Landroid. In order to make Landroid as secure as possible,
there is no reset procedure for the PIN that can be operated by anyone, including Landroid authorized service centers.
If you decide to sell your Landroid in the future, please restore the factory default 0000 PIN before delivering it to the new owner, or give
your personalized PIN to the new owner.
If you are delivering your Landroid to a Service Center, please let them know your PIN.
To Next Page
Loading...
