Why Worx WR153E turns on but the blade disc doesn't spin?
If your Worx Lawn Mower turns on, but the blade disc doesn't spin, it is normal when Landroid is searching for the charging base to recharge automatically.
Why is Worx Lawn Mower charging time so long?
Extended charging times for your Worx Lawn Mower can be caused by: * Debris on the charging strip: Clean the contact pins on both the charging base and the Landroid's charging strip with a cloth. * High temperature: Move the charging base to a shaded area or wait for cooler temperatures, as the charging protection program may be activated.
Why is my Worx WR153E Lawn Mower cutting grass unevenly?
Uneven grass cutting with your Worx Lawn Mower can occur for several reasons: * Insufficient mowing hours: Increase the mowing schedule. * Oversized mowing area: Reduce the mowing area. * Dull blades: Replace the blades and screws to balance the blade disc. * Incorrect cutting height: Raise the cutting height gradually. * Obstruction around blade disc: Remove any grass or objects. * Grass build-up: Ensure the blade disc rotates freely; remove debris if needed.
Why does my Worx WR153E have shorter run times?
Shorter run times between charges for your Worx Lawn Mower may be due to: * Clogging in the blade disc: Remove the blade disc and clean it. Also, consider if the grass is too high or thick. * Unbalanced blade disc: Inspect the blade disc and blades for debris, and replace the blades if necessary. * Battery condition: The battery may be old or exhausted and require replacement.
What does red light on Worx Lawn Mower charging base mean?
A red light on the Worx Lawn Mower charging base indicates that the boundary wire isn’t connected. Ensure the boundary wire is correctly connected to the charging base and check for any breaks in the wire.
Why does my Worx Lawn Mower stop in the working area?
Your Worx Lawn Mower might stop in the working area due to: an obstacle blocking its path (remove it); a cutting height that's too low for the grass (raise it gradually); an extended boundary wire exceeding 350m (reduce the length); or excessive distance between the lawn's center and boundary wire (keep it within 25m).
What to do if my Worx WR153E Lawn Mower flips over?
If your Worx Lawn Mower flips over, it may be due to an inclined obstacle on the lawn. Remove the obstacle from the Landroid’s working area.
Why does the green light turn on early on my Worx WR153E charging base?
The green light on the Worx Lawn Mower charging base might turn on before charging is complete because the charging base is overheating. Move the charging base to a shaded area or wait until it cools down. The display may also show ‘Battery temperature out of range! Please wait’.
Why does my Worx WR153E slip going downhill?
If your Worx Lawn Mower slips downhill out of its working area, it's likely due to low grip. Ensure the wheels are clean and free of mud to maximize traction.
How to fix the LED light on Worx WR153E Lawn Mower charging base if it doesn't turn on?
If the LED light on the Worx Lawn Mower charging base doesn't turn on, it might be due to a lack of power. Check that the charging base is correctly connected to the charger and that the charger is plugged into a working power supply.
Keep for future reference.
Read instructions carefully and understand controls.
Ensure correct installation and inspect area for foreign objects.
Follow instructions for safe operation and avoid moving parts.
Keep Landroid clean, charged, and protected from elements.
Use original packaging for long distances, handle carefully.
Handle battery packs with care, avoid short-circuiting and extreme temperatures.
Proper disposal of waste electrical products.
Lists all included components for Landroid setup and operation.
Identifies key components and features of the Landroid mower.
Explains autonomous operation, scheduling, charging, and sensors.
Landroid learns lawn and optimizes mowing cycles via cloud computing.
Describes perimeter mowing and customization options.
Detects rain to stop mowing and return to charging base.
How to adjust cutting height for different grass lengths.
Securing Landroid with PIN code and tracking options.
Guide to setting up charging station and boundary wire.
Importance of planning and selecting charging station location.
Distances for wire placement based on lawn edges.
Inspecting lawn and identifying areas/obstacles.
Physical installation of charging station and boundary wire.
Using pegs and creating perimeter islands for wire.
Closing the boundary loop and final connections.
Connecting or extending boundary wire.
First-time start, panel overview, PIN change.
PIN management and language setting.
Establishing internet connection for Landroid features.
App as an ecosystem, AR, data, statistics, service.
Customizing Landroid with optional accessories.
Keeping blades sharp and procedure for replacement.
Procedures for cleaning upper and lower parts.
Battery maintenance, winter storage, and updates.
Checking and performing software updates.
Overview of panel interface and basic settings.
Methods to customize Landroid's working hours.
Adjusting rain delay and setting up mowing zones.
Lists Landroid operational messages and actions.
Lists Landroid error messages, causes, and actions.
Lists common Landroid symptoms, causes, and solutions.
Proper disposal guidance for electrical products.
Lists specifications for WR153E and WR155E models.
Acoustic emission levels of the Landroid.
General| Type | Robotic lawn mower |
|---|---|
| Noise level | 62 dB |
| Cutting width | 220 mm |
| Grass catcher | - |
| Product color | Black, Orange |
| Maximum lawn area | 1500 m² |
| Maximum cutting height | 60 mm |
| Minimum cutting height | 30 mm |
| Smartphone remote support | Yes |
| Power source | Battery |
| Battery capacity | 4 Ah |
| Battery technology | Lithium |
Weight and Dimensions| Depth | 445 mm |
|---|---|
| Width | 630 mm |
| Height | 225 mm |
| Weight | 9500 g |
To Next Page
