Getting started
EN
17
Get familiar with the control panel
Landroid’s control panel provides the key functions in a minimalistic design.
For advanced functions, the free Landroid app provides further options in a richer interface: your smartphone.
NOW FOR THE EXCITING BIT!
START LANDROID FOR THE FIRST TIME.
Start Landroid
• Place Landroid inside the boundary wire
• Press the On/Off button until the screen displays ‘Welcome’
• The display prompts input of PIN
• Input the default PIN AAAA by pressing the ↑ (A) key four times
• The screen displays ’PIN code OK’
• Press the START button, then press OK. Landroid will start mowing
• You can stop Landroid at any time by pressing the STOP button
• To send Landroid to the charging station, press the Home key, then press OK
Change PIN
To make your Landroid safer and more secure, change the default AAAA PIN to a PIN of your choice.
• Turn Landroid on and unlock it by inputting the default PIN
• Press the → (D) key
• Select the padlock icon by using the → and ← Navigate buttons, then press OK
• Screen displays ‘Change PIN code’. Press OK to start the procedure
• Screen displays ‘Old PIN’. Input the default PIN AAAA
START
OK
A
BC D
Mon 11/07 00:00
Work done today
Charging 50%
NAVIGATE:
move up/down and back/forth
through menus. Input PIN
POWER
On/Off
OK: confirm
selected choice
START: start mowing/
reset problems
Battery charge statusDay and date
Wi-Fi signal strengthTime
RETURN: back one step
to former menu
HOME: send Landroid
to charging station
STOP
To Next Page
Loading...
