Why Worx WR142E Lawn Mower wheels skid or repeatedly slip?
If your Worx Lawn Mower wheels skid or repeatedly slip, remove any foreign objects from underside of Landroid. If the lawn is too wet, wait until it has dried.
Why is Worx Lawn Mower not operating at the correct time?
If your Worx Lawn Mower is not operating at the correct time, set the clock to the correct time. If programmed cutting times are incorrect, change the time settings for the mower to start and stop. If the percentage of weekly operating time set through the APP has changed, set the correct percentage through the APP.
Why is my Worx WR142E cutting grass unevenly?
If your Worx Lawn Mower is cutting grass unevenly, several factors could be at play. First, ensure your mowing schedule allows enough hours per day. If the mowing area is too large for your Landroid model, consider decreasing the area or increasing working time. Check the blades; dull blades need replacing, along with their screws, to balance the blade disc. Adjust the cutting height if it’s too low for the grass length, raising it gradually. Also, inspect the blade disc for obstructions like grass or other objects, and clean any buildup in the blade disc or motor frame box to ensure easy rotation.
Why Worx WR142E is starting to have shorter run-times between charges?
If your Worx Lawn Mower is starting to have shorter run-times between charges, start by taking off the blade disc and cleaning it, because something may be clogging it, creating friction and increasing power consumption. Also, make sure the grass isn't too high or thick. Check the blade disc and blades for debris, and replace the blades if needed. If these steps don't help, the battery may be old and need replacing, or you may need to reset the working time.
Why Worx Lawn Mower stops in the working area?
If your Worx Lawn Mower is stopping in the working area, first remove any obstacles from the area. If the cutting height is set too low, raise it gradually. Ensure the boundary wire doesn't exceed 300m to avoid signal problems, and keep the distance between the lawn's center and the boundary wire within 25m to prevent signal attenuation.
How to fix Worx Lawn Mower when it vibrates?
If your Worx Lawn Mower vibrates, check the blades for damage and replace them if necessary. Also, remove any debris or foreign objects from the blades and blade disc.
What to do if Worx WR142E flips over?
If your Worx Lawn Mower flips over, exclude the obstacle from Landroid’s working area, because there may be an inclined obstacle on the lawn.
Why Worx WR142E runs outside the boundary wire?
If your Worx Lawn Mower runs outside the boundary wire, or does not mow an area within a boundary wire zone, or reverses/rotates erratically near the boundary wire, ensure at least 1m clearance between your boundary wire and that of your neighbor. Check boundary wire joints and insulate to provide a fully waterproof connection if in wet conditions. Repair damaged boundary wire with the wire connectors supplied if there is boundary wire electric signal leakage due to broken insulation.
What to do if Worx WR142E slips out of its working area going down a hill?
If your Worx Lawn Mower slips out of its working area going down a hill, check that the wheels are clean and free of mud to ensure maximum grip.
Why the green light on Worx Lawn Mower charging base turns on before charging is complete?
If the green light on the charging base of your Worx Lawn Mower turns on before charging is complete, place the charging base in a shady area or wait until it reaches the normal temperature, because the charging base may be overheating or overcooling.
Read all warnings and instructions for safe operation and future reference.
General operating procedures, safety precautions, and handling the machine.
Guidelines for maintaining and storing the robotic lawnmower, including safety warnings.
Advice on electrical connections, residual risks, and safe transportation methods.
Maintain separation distance for RF exposure compliance during device operation.
Crucial safety warnings regarding handling, charging, and disposal of battery packs.
Important warnings about Landroid use, disposal of batteries, and cleaning precautions.
Information on using Landroid with other WORX functional accessories.
Lists and illustrates all the components included in the product packaging.
Diagrams identifying key parts and features of the Landroid robotic lawnmower.
Detailed technical specifications for different Landroid models, including performance data.
Details noise levels, hearing protection, and lists accessories for each Landroid model.
Describes the garden product's intended use for domestic lawn mowing.
Guidance on keeping blades sharp, including replacement procedures and safety warnings.
Step-by-step guide on how to safely remove and replace the cutting blades.
Instructions for cleaning the Landroid's upper body, bottom, wheels, and charging contacts.
Information on charging the Landroid battery, manual charging, and battery life.
Instructions for preparing and storing the Landroid for winter hibernation and spring use.
Guidance on updating Landroid software via OTA or USB for optimal performance.
Lists common error messages, their causes, and recommended actions for resolution.
Guide to diagnosing and resolving operational issues based on symptoms and causes.
Guidance on proper disposal of waste electrical products and recycling.
Details product compliance with directives, standards, and notified body information.
General| Model | WR142E |
|---|---|
| Category | Lawn Mower |
| Battery Voltage | 20 V |
| Battery Capacity | 2.0 Ah |
| Maximum Lawn Size | 700 m² |
| Connectivity | Wi-Fi |
| Power Source | Battery |
| Slope Capability | 35% |
| Weight | 9.5 kg |
To Next Page