Worx WX425 User Manual

Circular saw EN
9
8
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
0
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Blade 1
Parallel guide 1
Vacuum adapter (32mm&35mm) 2
Hex key 1
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.

Worx WX425 Specifications

General

Blade diameter	160 mm
Idle speed (max)	5000 RPM
Sound power level	93 dB
Bevel capacity (max)	45 °
Cutting depth (45º)	38 mm
Cutting depth (90º)	55 mm
Sound pressure level	82 dB
Sound level uncertainty	3 dB
Vibration level (wood cutting)	4.36 m/s²
Vibration level uncertainty (wood cutting)	1.5 m/s²
Input power	1200 W
Power source	AC
AC input voltage	230 - 240 V
AC input frequency	50 / 60 Hz
Motor type	Brushed
Product color	Grey, Orange, Stainless steel, White
Built-in light	No
Protection class	II
Dust extraction port	Yes
Suitable for materials	Wood

Weight and Dimensions

Width	340 mm
Weight	3500 g