To Next PageTo Next Page
Need help?Do you have a question about the Worx WX425 and is the answer not in the manual?
General| Blade diameter | 160 mm |
|---|---|
| Idle speed (max) | 5000 RPM |
| Sound power level | 93 dB |
| Bevel capacity (max) | 45 ° |
| Cutting depth (45º) | 38 mm |
| Cutting depth (90º) | 55 mm |
| Sound pressure level | 82 dB |
| Sound level uncertainty | 3 dB |
| Vibration level (wood cutting) | 4.36 m/s² |
| Vibration level uncertainty (wood cutting) | 1.5 m/s² |
| Input power | 1200 W |
| Power source | AC |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Motor type | Brushed |
| Product color | Grey, Orange, Stainless steel, White |
| Built-in light | No |
| Protection class | II |
| Dust extraction port | Yes |
| Suitable for materials | Wood |
Weight and Dimensions| Width | 340 mm |
|---|---|
| Weight | 3500 g |
Details on sound pressure and sound power levels for the circular saw.
Information on vibration total values and typical weighted vibration.
Instructions to prevent kickback during saw operation.
Describes the machine's intended purpose for cutting wood.
Guidance on how to operate the circular saw safely and effectively.
Instructions for using guides for straight and angled cuts.
