What to do if my Worx WX420 Saw won't start?
If your Worx Saw won't start when you operate the on/off switch, there are a few potential causes. First, ensure the power cord is securely plugged into a working outlet. If the power cord is broken, it may also prevent the tool from starting. Another possibility is that the carbon brush has worn down, in which case you should replace it by a qualified maintenance person.
How to fix cutting depth that is less than set on my Worx WX420?
If the cutting depth of your Worx Saw is less than what you've set, it's likely due to sawdust accumulation at the rear of the base. Shake out the sawdust to resolve this. You might also consider connecting a vacuum for dust collection to prevent future issues.
What to do if the blade spins or slips on my Worx WX420?
If the blade of your Worx Saw spins or slips, it may not be tightly engaged with the spindle. To fix this, remove the blade and reassemble it as described in the INSTALL/CHANGE THE BLADE section.
Why won't my Worx WX420 blade cut a straight line?
If your Worx Saw blade won't cut a straight line, it could be due to a few reasons. First, ensure that you mount a new, sharp blade on the saw. Other potential issues are improper blade mounting or incorrect saw guidance during operation.
General| Product color | Black, Orange |
|---|---|
| Protection class | II |
| Blade diameter | 85 mm |
| Idle speed (max) | 3500 RPM |
| Sound power level | 91 dB |
| Cutting depth (90º) | 27 mm |
| Sound pressure level | 80 dB |
| Sound level uncertainty | 3 dB |
| Saw blade included | Yes |
| Diamond disc | - |
| Uncertainty K | 1.5 m/s² |
| Vibration emission | 4.24 m/s² |
| Input power | 400 W |
| Power source | AC |
| AC input voltage | 230-240 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Weight | 1500 g |
|---|
Keep work area clean, well lit, and avoid explosive atmospheres.
Follow instructions regarding plugs, grounding, and water exposure.
Stay alert, use PPE, avoid unintentional starting, and dress properly.
Maintain firm grip, position body correctly, and support workpiece to resist kickback.
Release trigger if binding, and center blade when restarting.
Check guard movement, spring, and ensure it covers the blade.
Use and maintain laser as per instructions, never aim at people or eyes.
Warning against staring into the beam of a Class 2 laser.
Step-by-step guide for installing or changing the saw blade.
To Next Page