Need help?Do you have a question about the Wouxun KG-UV3D and is the answer not in the manual?
How to navigate between VFO, Channel, and FM Radio modes on the transceiver.
Initiating and configuring scan types (TO, CO, SE) for signal detection.
Procedures for restoring factory default settings and parameters.
General| Battery Capacity | 1800 mAh |
|---|---|
| Display | LCD |
| Modulation | 16KΦF3E / 11KΦF3E |
| Operating Voltage | 7.4V DC |
| Channel Spacing | 25 kHz / 12.5 kHz |
| Antenna Impedance | 50Ω |
| Frequency Stability | ±2.5 ppm |
| Battery | Li-ion |
| Operating Temperature | -20°C to +60°C |
| Frequency Range | 136-174 MHz, 400-480 MHz |
| Power Output | 5W / 1W |
| Output Power | 5W / 1W |
To Next Page
