Do you have a question about the Wouxun KG-UV6X and is the answer not in the manual?
Explains compliance with RF exposure standards and operational guidelines.
Guidelines for using accessories and proper radio placement for safety.
Legal notices, general warnings, and FCC interference compliance.
Information on obtaining necessary radio licenses and dealer support.
General safety measures and awareness of operational hazards.
Lists and illustrates all items included in the transceiver package.
Dual band, frequency ranges, output power, memory channels, and VOX.
Working modes, channel settings, bandwidth, scan modes, and prompts.
SOS function, PC programmability, IP55 rating, and other advanced features.
Explanation of various indicators shown on the transceiver's screen.
Identifies the main physical buttons and parts of the transceiver.
How to perform quick searches and switch between single/dual band modes.
How to select the master frequency using the A/B switch key.
Functionality of Side Key 2, RPT key, and 1750Hz burst tone.
Overview of the shortcut operation sheet for quick function access.
Quick access to voice guide, overtime alarms, and busy channel lockout.
Quick access for CTCSS/DCS settings and scan modes.
Shortcuts for stopwatch, channel name edit, memory, and delete functions.
Detailed instructions on using the transceiver's functions.
How to set frequency steps and adjust the squelch level.
How to enable the power saver mode for battery conservation.
How to select power levels and set transmitting prompts.
How to set the time-out timer to prevent long transmissions.
How to use VOX and enable/disable voice guidance.
Selecting bandwidth and setting overtime transmission alarms.
Enabling beep prompts and customizing power-on messages.
Preventing transmissions on occupied channels.
Using keypad lock and setting receiving/transmitting CTCSS.
Setting receiving and transmitting DCS codes for selective communication.
Setting transmitting DCS and selecting scan modes.
Configuring Side Key 1 for Scan, Lamp, SOS, or FM Radio.
Activating the emergency SOS signal feature.
How to turn on, tune, and store FM radio stations.
Using the PF2 key to activate the stopwatch timer function.
Configuring PF2 for RPT functions and frequency shift.
Activating the flashlight and SOS features using the PF2 key.
Activating the FM radio or inactivating PF2 key functions.
Switching between Frequency (FR) and Channel (CH) modes.
Detailed options for switching between frequency and channel modes.
Enabling or disabling the automatic backlight feature.
Setting frequency offset and shift direction for repeaters.
Using the stopwatch timer function.
How to edit channel names manually or via software.
Storing frequencies and parameters into memory channels.
Steps to delete stored memory channels.
Performing VFO reset and ALL reset operations.
Setting the band for transmitting SOS signals.
Scanning for CTCSS/DCS tones from other transmitters.
Manual activation of DTMF tones and sidetone settings.
Functions related to ANI ID codes and transmission delay.
Setting and using priority scan and reverse frequency functions.
Low voltage alerts and overtime transmission reminders.
Steps for cloning data between radios using a cable.
Programming channels to work with repeaters manually.
Instructions for charging the transceiver's battery.
Steps for installing drivers and software for PC programming.
Solutions for power, battery life, and audio problems.
Solutions for unresponsive keypads and non-storing functions.
Overview of essential technical parameters of the transceiver.
A table listing standard CTCSS frequencies.
A table listing standard DCS codes.
Comprehensive technical specs including range, power, dimensions, and waterproof rating.
Images and names of optional accessories available for purchase.
Official statement of product compliance with relevant directives.
Note regarding potential inaccuracies or updates in the manual.
| Brand | Wouxun |
|---|---|
| Model | KG-UV6X |
| Category | Transceiver |
| Language | English |