WowWee ROBOQUAD - Page 21

19
Programming / Support
Programming
Program button Program play button
Unshifted Program Program play
Shift-Green Program back*
Shift-Orange Program erase
* Deletes the last command from the program
Program
Entering program mode
To enter program mode, press the program button. Roboquad is ready to
remember your command inputs.
Programming Roboquad
Roboquad can be programmed up to 40 commands. For each command you
enter, Roboquad will perform the move and conrm it with an “afrmative”
sound. Roboquad will add each new command you enter to the end of the
programming sequence. To delete the last command, press the program button
in shift-green.
Clearing a program
The entire program can be cleared by pressing the program button in
shift-orange.
The following functions will alter from their original function when included
in a program:
• Stop will become a pause when entered into a program
• Walks will reduce to 8 steps in program mode
• Scan functions will perform fewer scan passes
The following functions cannot be included in a program:
• Autonomy
• Guard mode
• Smart-scan
• Volume control
• Sleep mode
• Sensors on/off
• Personality state level buttons
(the levels on the remote controller will not alter when in program mode)
• any of the programming functions
Playing the program
The user can play back a program at any time by pressing program play. If a
program is not present, Roboquad will sound a “negative” to the request.
Exiting program mode
Pressing the program play button will exit Roboquad from program mode,
playing a program if one is stored.
Roboquad will exit program mode automatically approximately 20 seconds
after the last program command is given. If no command has been entered,
Roboquad will exit into normal mode. If a command has been entered,
Roboquad will perform the routine.
Note: The program memory is cleared when Roboquad powers down after
approximately 24 hours in sleep mode or when turned off.
Support
If you have questions about Roboquad that are not answered here, refer to the
ofcial Roboquad website for more information and frequently asked
questions: www.roboquadonline.com