Need help?Do you have a question about the WP AER 43 and is the answer not in the manual?
Explains the meaning of various symbols used in the manual for clarity.
Defines typographical conventions like proprietary names, brands, and terms.
Specifies the intended application and limitations of the chassis component.
Describes improper uses of the component that can lead to dangers.
General instructions and guidance for safe operation of the component.
Explains hazard symbols and their associated risk levels (Danger, Warning, Note).
Outlines essential rules for safe riding and component use.
Specifies guidelines for performing maintenance and repair work correctly.
Advises on responsible use and disposal of fluids and components.
Emphasizes reading the manual for safe operation and maintenance.
Highlights the importance of proper installation for safety and functionality.
Details warranty conditions and requirements for authorized service.
Specifies the use of approved fluids and lubricants.
Recommends using only WP-approved parts and accessories.
Stresses adherence to service intervals for optimal performance and longevity.
Notes that manual figures may show special equipment or disassembled parts.
Provides information on seeking assistance from WP Authorized Centers.
Describes the location and format of the fork's article number.
Provides initial setup guidance and warnings for first-time use.
Lists pre-ride checks for safe operation.
Notes that additional work may be invoiced separately.
Specifies maintenance tasks required at specific intervals.
Lists recommended maintenance tasks at specific intervals.
Instructions on safely lifting the motorcycle.
Step-by-step guide to removing standard fork legs.
Instructions for installing an aftermarket version of the fork.
Procedure for bleeding the fork legs.
Guide on cleaning fork dust boots and inner tubes.
Instructions on safely removing the motorcycle from a lift stand.
Steps to remove the fork protector.
Steps to install the fork protector.
Procedure for removing the front wheel.
Procedure for installing the front wheel.
How to adjust suspension based on rider weight.
Overview of the fork's air suspension and features.
Guidance on evaluating the fork's basic setup.
Steps to adjust the air pressure in the fork.
How to adjust the fork's compression damping.
How to adjust the fork's rebound damping.
Technical specifications related to the fork.
Table of specific torque values for chassis components.
To Next Page
General