WP AER 43 - Adjusting the Rebound Damping of the Fork

9 TUNING THE CHASSIS
20
9.6 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
H02550-10
–
Turn adjusting screw
1
clockwise all the way.
Info
Adjusting screw
1
is located at the upper end of the
right fork leg.
– Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Rebound damping 18 clicks
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.