Bulletin # 056
5 Pages
May 10, 2006
having knowledge of this recall due to non-registration, the
liability for consequential damage will be on the selling
Dealer.
This work is to be done in conjunction with Bulletin #055
The Fix: Using the attached instructions, install the muffler
heat shield on all affected mowers. For units that have been
retailed, contact the end-user to have this service performed.
Units that have been retailed but not registered must be
registered immediately.
*** All affected mowers need to have this update performed.
No affected mower should be retailed without this service being
performed.
Claim
Procedure: 0.6 hour of labor allowed. Complete the “Quick-Claim-Form” in
Bulletin #055 and submit within 15 days of the date of repair.
Work must be done at the same time as Bulletin #055 and
should be claimed on the same claim form.
17
To Next Page
Loading...
