Bulletin # 063
2 Pages
October 5, 2006
Pulley
Parts information
Subject The 71460069 pulley is being replaced with a new pulley
Units
Affected: Stander 42” – serial 26288 through 35903
Sentar 52” & 61” – serial 26988 through 35988
Z 52” & 61” – serial 30200 through 36009
Situation: Pulley 71460069 is being replaced with part number 71460098.
71460098 requires a bore adapter and additional hardware for
proper installation, fit and function
Part number 71460069 is being superseded by kit part number
71460106 (for Sentar and Z applications). When an order is
received for 71460069, it will be filled with 71460106.
71460106 is a kit that includes:
• 71460098 – pulley
• 22420007 – bore adapter for certain Sentar and Z
mowers
• 13990038 - washer
Î If replacing the pulley on a 42” Stander, see below for
individual component part numbers – a pulley kit is not
available for this mower
Additional parts information is listed below.
The Fix: This is not a recall - use the information provided to order the
correct parts only as needed
Claim
Procedure: None – this is for informational purposes only
31
To Next Page
Loading...
