Bulletin # 056
5 Pages
May 10, 2006
ADDING MUFFLER HEAT SHIELD ON SPORT &
RH MOWERS
*** PRODUCT RECALL ***
Subject: Adding the muffler heat shield on all Sport and RH mowers
NEW PART # 91410026 – includes heat shield and gaskets
Units
Affected: All Sport and RH mowers with a serial number from 24188
through 33155. You may find that some of the serial numbers
in this range have had the update performed prior to your
receiving the mower.
Situation: It has been determined that a muffler heat shield needs to be
added to the affected mowers listed above. This is an
important recall. All mower registrations must be completed
and entered into the Wright online registration system and
communicated to Wright Manufacturing within 20 days of
receipt of this letter. Failure to do this exposes the Dealer to
the liability of consequential damages should a problem
develop with the mower related to the items in this bulletin.
This product recall requires that all affected mowers have
the muffler heat shield installed as quickly as possible, and
no later than 40 days from the date of this bulletin. In
cases where the mower has been retailed, the Dealer
should make very effort to accommodate those mowers
into their schedule at the earliest possible date.
We will be contacting all currently registered mower
owners to inform them of the need for this service but
request that each Distributor/Dealer contact their
customers as well. Additionally, we may not have
registration for all retailed mowers which makes it
impossible for us to contact the consumer. In the event
that engine damage occurs due to the consumer not
16
To Next Page
Loading...
