wsm V3307-DI-T-E2B - Small End Bushing Tool; Idle Gear Bushing Tool

G-31
V3307-DI-T-E2B, WSM
G GENERAL
Small End Bushing Replacing Tool
Application : Use to press out and to press fit the small end bushing.
[Press out]
[Press fit]
W1040702
Idle Gear Bushing Replacing Tool
Application : Use to press out and to press fit the bushing.
W1039429
A 157 mm (6.181 in.)
B 14.0 mm (0.5512 in.)
C 120 mm (4.7244 in.)
D 27.4 mm dia. (1.0787 in. dia.)
E 30.95 mm dia. (1.2185 in. dia.)
F 20 mm dia. (0.7874 in. dia.)
a 6.3 μm (250 μin.)
b 6.3 μm (250 μin.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
A 157 mm (6.181 in.)
B 14.0 mm (0.5512 in.)
C 120 mm (4.7244 in.)
D 27.4 mm dia. (1.0787 in. dia.)
E 42.000 mm dia. (1.6535 in. dia.)
F 20 mm dia. (0.7874 in. dia.)
a 6.3 μm (250 μin.)
b 6.3 μm (250 μin.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
A 196 mm (7.72 in.)
B 25.0 mm (0.984 in.)
C 150 mm (5.91 in.)
D 34.5 mm dia. (1.36 in. dia.)
E 38.075 to 38.100 mm dia. (1.4991 to 1.5000 in. dia.)
F 20 mm dia. (0.79 in. dia.)
a 6.3 μm (250 μin.)
b 6.3 μm (250 μin.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
(1) Material : SS400
KiSC issued 01, 2009 A