wsm V3307-DI-T-E2B - Engine Stand Tool; Crankcase Aligning Plate Tool

G-37
V3307-DI-T-E2B, WSM
G GENERAL
Engine Stand
Application : Use to support engine.
W1033645
Crankcase Aligning Plate
Application : Use for aligning the crankcase 1 and 2.
W1047882
A 107 mm (4.21 in.)
B 246 mm (9.68 in.)
C 21 mm (0.83 in.)
D 204 mm (8.03 in.)
E 102 mm (4.02 in.)
F 15 mm (0.59 in.)
G 59 mm (2.3 in.)
H 14 mm dia. (0.55 in. dia.)
I 80 mm radius (3.1 in. radius)
J 70 mm (2.8 in.)
K 460 mm (18.1 in.)
L 270 mm (10.6 in.)
M 6.0 mm (0.24 in.)
N 70 mm (2.8 in.)
C10 Chamfer 10 mm (0.39 in.)
(1) Material : S43C
A 126.6 mm (4.984 in.)
B 49.1 mm (1.93 in.)
C 37.5 mm (1.48 in.)
D 20 mm (0.79 in.)
E 14 mm dia. (0.55 in. dia.)
F 14 mm dia. (0.55 in. dia.)
G 14 mm dia. (0.55 in. dia.)
H 17.5 mm (0.689 in.)
I 17.5 mm (0.689 in.)
J 35 mm (1.4 in.)
K 19 mm (0.75 in.)
(1) Material : S43C
KiSC issued 01, 2009 A