wsm V3307-DI-T-E2B - Servicing Specifications: Engine Body (Continued)

S-7
V3307-DI-T-E2B, WSM
ENGINE
ENGINE BODY (Continued)
W1042752
Item Factory Specification Allowable Limit
Camshaft Side Clearance – 0.10 mm
0.0039 in.
Camshaft Alignment – 0.01 mm
0.0004 in.
Cam Height Intake
Exhaust
37.50 mm
1.476 in.
37.90 mm
1.492 in.
37.00 mm
1.457 in.
37.40 mm
1.472 in.
Camshaft
Camshaft Journal 1
Cylinder Block Bore 1
Camshaft Journal 2
Cylinder Block Bore 2
Oil Clearance
O.D.
I.D.
O.D.
I.D.
0.050 to 0.091 mm
0.0020 to 0.0035 in.
34.934 to 34.950 mm
1.3754 to 1.3759 in.
35.000 to 35.025 mm
1.3780 to 1.3789 in.
43.934 to 43.950 mm
1.7297 to 1.7303 in.
44.000 to 44.025 mm
1.7323 to 1.7332 in.
0.15 mm
0.0059 in.
–
–
–
–
Piston Pin Bore I.D. 28.000 to 28.013 mm
1.1024 to 1.1028 in.
28.05 mm
1.104 in.
Piston Pin to Small End Bushing
Piston Pin
Small End Bushing
Oil Clearance
O.D.
I.D.
0.020 to 0.040 mm
0.00079 to 0.0015 in.
28.006 to 28.011 mm
1.1026 to 1.1027 in.
28.031 to 28.046 mm
1.1036 to 1.1041 in.
0.15 mm
0.0059 in.
–
–
Connecting Rod Alignment – 0.05 mm
0.002 in.
Piston Ring Gap Top Ring
Second Ring
Oil Ring
0.25 to 0.40 mm
0.0099 to 0.015 in.
0.30 to 0.45 mm
0.012 to 0.017 in.
0.25 to 0.45 mm
0.0099 to 0.017 in.
1.25 mm
0.0492 in.
1.25 mm
0.0492 in.
1.25 mm
0.0492 in.
KiSC issued 01, 2009 A