OxiTop
®
Control OC 110 Overview
ba31116e05 07/2014 9
1.3 Data management
The measuring head records the measured values and stores the measuring
data. Using the controller, the collected and stored data are read out from the
measuring head and stored in the “sample management“. Starting at the
OxiTop
®
sample management, it is possible to make the graphical and statis-
tical evaluation of the sample data.
The data can be transferred from the controller to a computer via the RS232
interface. The read-out software Achat OC facilitates to process the stored data
further.
Additionally, the data can be transferred to an IR printer via the IR interface.
1.4 Literature
Further information and application reports on the subject of measuring with the
system OxiTop
®
Control can be obtained at no cost from WTW:
CD-ROM Applications for OxiTop
®
Control
CD-ROM Principles of measuring technique
To Next Page
Loading...
Need help?
General
