To Next PageTo Next Page
Need help?Do you have a question about the wtw Multi 350i and is the answer not in the manual?
General| mV resolution | 0.1 mV |
|---|---|
| Temperature resolution | 0.1 °C |
| TDS resolution | 1 mg/L |
| Memory | 500 data sets |
| IP Rating | IP67 |
| Weight | 500 g |
| pH resolution | 0.001 / 0.01 / 0.1 pH |
| Temperature range | -5.0 ... +105.0 °C |
| Salinity range | 0 to 70 ppt |
| Salinity resolution | 0.1 |
| TDS range | 0 ... 1999 mg/l |
| Conductivity range | 0 to 1000 mS/cm |
| Measurement Parameters | pH, Conductivity, Salinity, TDS, Temperature |
| Conductivity Measurement Range | 0 to 1000 mS/cm |
| Accuracy | Varies by parameter |
| Display | LCD graphic display |
| Interface | USB |
| Power Supply | 4×AA batteries or AC adapter |
General information on how safety instructions are indicated in the manual.
Explains how the power pack supplies the instrument and charges batteries.
Details the steps to power on the measuring instrument and what to expect on the screen.
Indicates measurement signal stability during all measurements.
Guides on initiating calibration and handling calibration results.
Lists menu items for pH/ORP measurements, including calibration and resolution settings.
Specifies measuring ranges, resolutions, and accuracies for pH/ORP and ISE measurements.
Details DO measurement ranges, resolutions, accuracy, and correction functions.
Specifies measuring ranges and resolutions for conductivity and specific resistance.
Provides accuracy details for temperature compensation, SAL, and TDS measurements.
