Need help?Do you have a question about the wtw Multi 197i and is the answer not in the manual?
General| Temperature resolution | 0.1 °C |
|---|---|
| IP Rating | IP67 |
| pH range | 0 to 14 |
| pH resolution | 0.01 pH |
| mV resolution | 0.1 |
| Temperature range | -5 to 105 °C |
| Conductivity range | 0 to 1000 mS/cm |
| Salinity resolution | 0.1 |
| TDS range | 0 to 1999 mg/L |
| Measurement Parameters | pH, mV, Temperature, Conductivity, Salinity, TDS |
| Dissolved Oxygen Measurement Range | 0.0 to 20.0 mg/L |
| Power supply | 4 x AA batteries |
| Display | Graphic LCD with backlight |
Defines the intended and authorized applications of the measuring instrument.
Outlines essential safety precautions and guidelines for operating the instrument safely.
Details the steps for setting up the instrument for the first time, including date and time.
Covers preparatory activities, general information, and measurement procedures for pH and ORP.
Covers general information, measurement procedures, calibration, and salt content correction for D. O.
Covers general information, measurement, calibration, and functions related to conductivity measurements.
Lists common error messages related to pH measurements and provides causes and remedies.
Lists common error messages related to oxygen measurements and provides causes and remedies.
Lists common error messages related to conductivity measurements and provides causes and remedies.
To Next Page
