Need help?Do you have a question about the wtw Multi 9310 and is the answer not in the manual?
General| Temperature resolution | 0.1 °C |
|---|---|
| Dissolved oxygen resolution | 0.01 mg/l |
| Dissolved oxygen saturation resolution | 0.1 % |
| Display | Graphic LCD |
| Protection class | IP67 |
| pH resolution | 0.01 pH |
| ORP measurement range | ± 2000.0 mV |
| ORP resolution | 1 mV |
| Temperature measurement range | -5.0 ... +105.0 °C |
| Conductivity resolution | 0.01 mS/cm |
| Salinity measurement range | 0.0 to 70.0 ppt |
| Salinity resolution | 0.1 ppt |
| Interface | USB |
| Power supply | 4 x AA batteries |
| Weight | 400 g |
Description of the compact digital precision meter for pH, ORP, conductivity, and D.O. measurements.
Details on the Multi 9310P model featuring an integrated printer for GLP documentation.
Information about the suitable IDS sensors for the Multi 9310 meter.
Guidance on understanding safety instructions within the operating manual.
Requirements and guidelines for the safe use of the meter.
List of items included with the Multi 9310 meter.
Information on how to power the Multi 9310 meter.
Procedure for setting up the meter for the first time.
Fundamental principles for operating the meter, including keypad and display.
Instructions for powering the meter on and off.
Steps for logging into the meter with a user name.
Guide to navigating menus, dialogs, and measurement screens.
Procedure for measuring pH values using the meter.
Detailed guide on calibrating pH measurements for accuracy.
Procedure for measuring ORP values with the meter.
Information and steps for ORP sensor calibration.
Procedure for measuring D.O. concentration, saturation, and partial pressure.
Steps and evaluation for performing an FDO® sensor check.
Guide to calibrating dissolved oxygen sensors.
Procedure for measuring conductivity values.
Explanation of temperature compensation methods for conductivity.
Steps for calibrating conductivity sensors and determining cell constant.
Configuration options for pH measurements, including buffers and intervals.
Configuration options for ORP measurements.
Configuration options for Dissolved Oxygen measurements.
Configuration options for conductivity measurements.
General settings not specific to any sensor type.
Procedures for resetting measurement and system settings.
Instructions for manually storing measured data.
Configuration for automatic data storage at set intervals.
Options for editing, erasing, and viewing stored measurement data.
How to output current measurement data via USB.
Procedure for transferring data from the meter to a PC.
Steps for connecting the meter to a PC using a USB-B interface.
Overview of different data transmission methods to a PC.
Information on using the MultiLab Importer software for data analysis.
Instructions for setting up and powering the printer on/off.
How to use the printer for operation and printing data.
Options for configuring printer settings like font size.
Basic maintenance tasks for the printer.
Solutions for common printer issues.
Routine maintenance activities, including battery replacement.
Guidelines for cleaning the exterior of the meter.
Recommendations for packing and transporting the meter.
Information on the proper disposal of the meter.
Common causes and remedies for pH measurement errors.
Common causes and remedies for D.O. measurement errors.
Common causes and remedies for conductivity measurement errors.
General causes and remedies for common instrument issues.
Detailed measuring ranges, resolutions, and accuracy specifications.
Specifications for dimensions, weight, electrical safety, and ambient conditions.
Procedure for updating the meter's firmware via PC.
Procedure for updating the firmware of connected IDS sensors.
Definitions of terms related to pH and ORP measurements.
Definitions of terms related to conductivity measurements.
Definitions of terms related to dissolved oxygen measurements.
Definitions of general measurement and instrument-related terms.
To Next Page
