wtw Multi 9310 - Switching the Meter On and Off

Multi 9310 Operation
ba75937e03 12/2011 19
4.2 Switching on the meter
2. Display further sensor data (settings) with <F1>/[More].
1. Switch the meter on with <On/Off>.
The meter performs a self-test.
2. Connect the sensor.
The meter is ready to measure.
More
01.07.2011
08:00
SenTix 940
B09250001
pH resolution 0.001
mV resolution 0.1
Buffer TEC
Calibration interval 7d
Unit for slope mV/pH
QSC: off
Software-Version V 1.00
SenTix 940
B092500013
01.07.2011
08:00
Back
Info
01.07.2011
08:00
USB output