wtw Multi 9310 User Manual

Multi 9310 Printer (only Multi 9310P)
ba75937e03 12/2011 85
12.5 What to do if... / printer
Integrated printer
does not print
Printer operating -
paper not being
printed
Integrated printer
prints automatically
Use original WTW rolls of paper only.
You will find information on this in the WTW catalog L
ABORATORY
AND FIELD INFORMATION or on the Internet.
The thermal paper will remain legible for at least 7 years if stored
appropriately.
Cause Remedy
– Printer switched off
(LED flashing)
– Switch on the printer
(LED illuminated)
– No power pack connected – Connect the power pack
– USB cable connected – Disconnect the USB cable from the
meter
– Function "automatic storing at
intervals" with long intervals is
switched on
– Switch off the function (see section
10.2 A
UTOMATIC DATA STORAGE AT
INTERVALS, page 76)
– No paper available – Insert a roll of paper
Cause Remedy
– Paper inserted the wrong way up – Turn the roll of paper around and
insert it with the other side upwards
Cause Remedy
– The function "Automatic storage
at intervals" or "Transmit data
automatic at intervals" is
switched on
– Switch off the function (see section
10.2 A
UTOMATIC DATA STORAGE AT
INTERVALS, page 76 or
section 11.4 O
PTIONS FOR DATA
TRANSMISSION TO A PC, page 82)

wtw Multi 9310 Specifications

General

Brand	wtw
Model	Multi 9310
Category	Measuring Instruments
Language	English