wtw Multi 9310 - Commissioning the Meter; Scope of Delivery; Power Supply Options; Initial Commissioning Steps

Multi 9310 Commissioning
ba75937e03 12/2011 13
3 Commissioning
3.1 Scope of delivery
z MeterMulti 9310
z 4 batteries 1.5 V Mignon type AA
z Power pack
z USB cable (A plug on mini B plug)
z Stand
z Stand holder
z Comprehensive operating manual (4 languages)
z Short instructions
z CD-ROM with
– USB drivers
– comprehensive operating manual
– software MultiLab User
– software MultiLab Importer
3.2 Power supply
The Multi 9310 is supplied with power in the following ways:
z Mains operation with the supplied power pack
z Battery operation (4 batteries, 1.5 V Mignon type AA)
z USB operation via a connected USB-B cable
3.3 Initial commissioning
Perform the following activities:
z Insert the supplied batteries
z For mains operation: Connect the power pack
z If necessary, mount the stand
z Switch on the meter (see section 4.2 S
WITCHING ON THE METER, page 19)
z Set the date and time (see section 4.5.5 E
XAMPLE 2 ON NAVIGATION: SETTING
THE DATE AND TIME, page 26)