Operation Multi 197i
44
ba75339e04 07/2009
4.7 Saving data
The portable Multi 197i multiparameter measuring instrument has an
internal data storage. It can store up to 500 datasets.
A complete data record consists of:
z Number of the storage location
z Date/time
z Measured values of the connected and active sensors
z Temperature values of the connected and active sensors
z Temperature measuring procedure
z ID number
You can transmit measured values (data records) to the data storage
in two ways:
z Save manually
z Switch on AutoStore (Int 1), see page 46
4.7.1 Saving manually
You can transmit a measured value to the data storage as follows:
1 Press the <STO> key.
The current number (location number No.) of the next free stor-
age location appears under the current measured value on the
display.
2 Confirm with <RUN/ENTER>.
The display switches to entering the ID number.
To Next Page
Loading...
