wtw Multi 350i - Conductivity Measuring Menu Options; Conductivity Measuring Menu Details

Multi 350i Measuring menus
25
Measuring menu:
conductivity
Menu item Possible
setting
Description
Calibration /
Calibration interval
1 ... 999 d Calibration interval for the
measuring cell (in days).
The meter reminds you to
calibrate regularly by the flashing
sensor symbol.
Calibration /
Calibration record
- Displays the calibration record of
the last calibration.
Reset - Resets all sensor settings to the
delivery condition.
Temp. comp. (TC) /
Reference temp.
20 °C
25 °C
Reference temperature.
This setting is only available
when the conductivity or specific
resistance display is set.
Temp. comp. (TC) /
Compensation
nLF
lin
Off
Procedure for temperature
compensation.
This setting is only available
when the conductivity or specific
resistance display is set.
Temp. comp. (TC) /
Linear coeff.
0.000 ...
3.000 %/K
Coefficient of the linear
temperature compensation.
This setting is only available
when the linear temperature
compensation is set.
Measuring cell Measuring cell used
Cal Measuring cells the cell constant
of which is determined by
calibration in the KCL control
standard solution.
Calibration ranges:
0.450 to 0.500 cm
-1
and
0.800 to 1.200 cm
-1
The currently valid cell constant
is displayed in the status line.
LR325/001 LR 325/001 measuring cell,
nominal cell constant
0.010 cm
-1
.
The cell constant is permanently
set.