EasyManua.ls Logo

Wulfsberg COBHAM FLEXCOMM II C-5000 - GUARD Receiver Tests

Wulfsberg COBHAM FLEXCOMM II C-5000
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FLEXCOMM II
C-5000 (Non-Digital)
Installation Manual
150-1355-000 Rev. M
CONFIDENTIAL AND PROPRIETARY TO COBHAM
Page 148
(7) Perform the steps 1-6 on RT #2, if applicable.
5. GUARD Receiver Tests
(1) Set the C-5000 GUARD channel(s) to a desired GUARD frequency between 30.00 and 960.00 MHz.
Utilizing a handheld radio or another Multiband radio set to the same frequency, talk into the
microphone with a strong voice (say and hold the word “four”). Verify that the C-5000 indicates a
receive condition by showing the receive indicator.
(2) Verify that receive audio is heard in the headset.
NOTE 0501 radios may utilize two GUARD channels. Repeat steps 1-2 for second GUARD
channel as required.
(3) Perform steps 1-2 on RT #2, if applicable.
6. Diagnostics
(1) Call our technical support staff and visit our online application notes for troubleshooting various
common installation issues and to help you determine the source of the problem you may be
experiencing.
Technical Support and Training
T: 1 (928) 756-1615
F: 1 (928) 708-1542
CAC.Prescott.Support@cobham.com
Technical Publications
T: 1 (928) 756-1531
F: 1 (928) 708-1532
CAC.Prescott.Publications@cobham.com
To obtain a Repair service RMA
T: 1 (928) 708-1531
F: 1 (928) 708-1532
prescott.repairs@cobham.com
End

Table of Contents

Related product manuals