Wulfsberg COBHAM FLEXCOMM II C-5000 - 3. Component Specifications

FLEXCOMM II
C-5000 (Non-Digital)
Installation Manual
150-1355-000 Rev. M
CONFIDENTIAL AND PROPRIETARY TO COBHAM
Page 29
3. Component Specifications:
COMPONENT
POWER REQUIREMENTS
C-5000
VOLTAGE: 27.5 Vdc ± 20% Aircraft
CURRENT: 0.4 amps (typical)
1.3 amps (maximum external loading)
FLEXCOMM II
RT-5000
VOLTAGE: 27.5 VDC Aircraft
STANDBY: 1.7 amps
RECEIVE: 1.7 amps
TRANSMIT: 10.0 amps
FLEXCOMM I
RT-30
RT-118
RT-138
RT-138F
RT-406F
RT-450
RT-9600
RT-9600F
RT-7200
Refer to FLEXCOMM I Transceiver System
Installation Manual , Manual Number 150-040011,
for power requirements.
Refer to VHF/FM Transceivers RT-7200, RT-9600,
AN/ARC-513(V) Installation /Operators Manual ,
Manual Number 150-0061-000, for power
requirements.
Table 2-1. System Power Requirements
A. C-5000 Communication Management Controller
Note: The installation and operation of the Frequency Agile C-5000 Control Unit is limited to
aircraft installations per FCC Rules and Regulations, Part 90, Section 90.423 and 90.203(h).
A non-frequency agile C-5000 is available for other than aircraft installations and is in
compliance with FCC Rules and Regulations 90.203(g).
(1) Number of Channels: 350 programmable channels
(2) Temperature: -30 to + 60 C
(3) Panel Lighting: 5 Vdc, 5 Vac, or 28 Vdc
(4) Keypad Lighting: Type: Electro Luminescent (E.L.) Lighting
Color: Blue/white (standard)
Green NVG (optional)
(5) Audio Output: Standard: 100 mV into 600 ohm load, shop adjustable
0.1 to 250 mW, 600 ohms
(6) Audio Input Level: Std. Voice: 0.25 Vrms 150 ohm balanced pair, shop
Adjustable 30 mV to 1.5 Vrms
(7) Microphone Interface: Carbon or equivalent