To Next PageTo Next Page
Need help?Do you have a question about the Würth DIGA CS-3 and is the answer not in the manual?
Prior to first use, modification risks, protective measures, and understanding symbols.
Rules for safe operation, handling, environment, and hazard prevention.
Risks from ejected fasteners, pointing the tool, and general handling dangers.
Hazards during operation, workplace risks, and issues from repetitive movements.
Precautions for noise, vibration, fuel cell, and gas handling.
Guidelines for safe charging, battery handling, and electrical safety.
Safety during transport, protective gear, and specific risks like nail breakage.
Measures for property damage, residual risks, and electrical safety.
Safety for extension cables, device overview, and fire prevention during charging.
Specifies the device's purpose, technical data, and contact information.
Explains the combustion drive mechanism and potential health hazards.
Instructions for charging the battery, LED indications, and battery status.
Procedure for inserting the gas cartridge, including warnings and notes.
Information on suitable substrates, penetration depth, and edge distances.
Instructions for loading magazine strips and clearing jams.
Step-by-step guide for firing pins, including safety notes and warnings.
Procedure for adjusting driving depth and safety precautions during adjustment.
Guidelines for storing the device, safe transport, and general maintenance.
Instructions for cleaning the filter pad and precautions against dust damage.
Procedures for cleaning the ejection channel, magazine, and device housing.
Guidelines for recycling electrical tools, accessories, packaging, and batteries.
Details on warranty coverage, service, and liability for printing errors.
A table listing common faults, their possible causes, and recommended remedies.
Data on noise and vibration emission values according to EN standards.
Statement of product conformity to relevant EU standards and directives.
General
