Würth DIGA CS-3 - Safety Instructions; General Safety and Symbols

135
Note
Modication of the device or manu-
facturing of additional devices is not
permitted. Such modications can
result in personal injury or malfunc-
tions.
■ Only appointed and trained personnel may
carry out repairs to the device. For such pur-
poses, always use original spare parts from
Adolf Würth GmbH & Co. KG. This will ensure
the continuing safe operation of the device.
Signs and symbols
The signs and symbols in these instructions should
help you to use the instructions and the machine
quickly and safely.
Note
Provides information on the most
eective or most practical use of the
tool.
■ Handling step
The dened sequence facilitates correct and
safe use of the device.
3 Result
The result of a sequence of handling steps is
described here.
[1] Item number
Item numbers are indicated in the text with
square brackets [ ].
Always wear ear protectors when
working.
Risk of severe injuries and acoustic
trauma.
Always wear safety glasses when
working.
Never place your hand under the
device. Severe injuries could result.
For Your Safety
GB
Please read and comply with this
instruction manual prior to rst use of
your device.
Keep these operating instructions for
later use or for a subsequent owner.
WARNING − Prior to rst use
always read the Safety instruc-
tions!
Failure to observe these operating instructions and
the safety instructions may result in damage to the
device and dangers for the operator and other
persons.
In case of transport damage, inform your dealer
immediately.
Safety instructions