Email：support@wybotpool.com Facebook: @WybotPool Website: www.wybotpool.com
Step 1 -Charging
Insert charger cable into the
device, and keep your cleaner
at least 3m away from the pool.
3m (9.8ft)
1 3
2
Unscrew protective cap, and ensure charg-
ing port dry.
Fully charge your device before first use.
Quick Start Guide
Step 3 -WYBOT App setting& mode selection
(If you do not need presetting, you may skip this step)
Step 2 -Starting the device
4
Screw protective cap back.
5
Press on/off button, and the LED
turns solid blue.
Put the device into the pool within
3 min., otherwise, it will power off.
The default cleaning mode is wall
then floor.
WYBOT S2(WY210C)
6 7
8
Please download WYBOT
and set your cleaning mode
in advance.
Register your account as
per App direction.
Bind your device as per App
direction.
Enable your mobile phone
Bluetooth.
Keep your device out of
water and within the range
of Bluetooth.
Your device will turn solid
purple after a successful
connection.
Customize your cleaning
mode via App.
①
②
Fully Charged！
Select a mode via the toggle.
Either way is workable.
or
MODE
MODE
MODE
MODE
MODE
MODE
MODE
To Next Page
Need help?
General
