Wyrestorm EX-SW-0301-H2 - Page 4

Copyright © 2018 WyreStorm Technologies | wyrestorm.com
EX-SW-0301-H2 v1 Quickstart Guide | 180619
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
4 of 4
Warranty Information
WyreStorm Technologies LLC warrants that its products to be free from defects in material and workmanship under normal use for a
period of ve (5) years from the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more details on our limited
product warranty.
Specications
Note: WyreStorm reserves the right to change product specication, appearance or dimensions of this product at any time without prior notice.
Audio and Video
Transmitter Receiver
Inputs
1x VGA In: 15-pin VGA
1x Display Port In: DisplayPort 1.3
1x HDMI In: 19-pin type A
1x HDMI In: 19-pin type A
1x HDBT In: 8-pin RJ-45 Female
Outputs 1x HDBT Out (Class A): 8-pin RJ-45 Female
1x HDMI Out: 19-pin type A
1x Audio Out: 3-pin Phoenix
Output Video Encoding HDBaseT Class B
Encoding Data Rate 9.2Gbps
End to End Latency 10μs (micro seconds)
Audio Formats 2ch Analog/PCM | Multichannel: LPCM
Video Resolutions (Max)
Video Resolution HDMI Cat6 Cat6a/7
1920x1200p @60Hz 12bit 15m/49ft 60m/197ft 70m/230ft
1920x1080p @60Hz 12bit 15m/49ft 60m/197ft 70m/230ft
3840x2160p @30Hz 8bit 4:4:4 7m/23ft 35m/115ft 40m/131ft
4096x2160p @60Hz 8bit 4:2:0 7m/23ft 35m/115ft 40m/131ft
Supported Standards DCI | RGB
Maximum Pixel Clock HDMI: 600mHz | HDBaseT: 297MHz
Communication and Control
HDMI HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT HDMI | HDCP 2.2 | EDID | 1-way PoH Receiver to Transmitter
Ethernet 1x 8-pin RJ-45 female | IP Control (TELNET)
RS-232 1x RS-232: 3-pin Phoenix (Transmitter and Receiver)
Relays 2x Relay: 3-pin Phoenix (Receiver Only)
Power
Power Supply 12V DC 3A
PoH IEEE 802.3af 15.4W Max | Receiver to transmitter
Max Power Consumption Transmitter: 7W | Receiver: 17W
Environmental
Operating Temperature 0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing
Storage Temperature -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing
Maximum BTU Transmitter: 24 BTU/hr | Receiver: 58 BTU/hr
Dimensions and Weight
Transmitter Receiver
Rack Units/Wall Box <1U <1U
Height With | Without Feet 20mm/0.79in 25mm/0.99in
Width With | Without Brackets 194mm/7.64in 223mm/8.78in
Depth With | Without Handles 94mm/3.71in 154mm/6.07in
Weight 0.5kg/1.1lbs 0.94kg/2.07lbs
Regulatory
Safety and Emission CE | FCC | RoHS