X-Rite PANTONE i1 - Device Status Indicators

5
Device Status Indicators
The i1 Paint device is equipped with a device status indicator on its top housing. The device status
indicators provide feedback on the current status of the device and guide you through the measurement
process.
General device status:
Off
The device is not connected to a powered USB port on your
computer
.
Solid white
The device is connected to power/USB.
Pulsating white
The device is connected and ready for measurement.
Solid red
The calibration of the device failed due to a hardware problem.
Short green pulse
This Indicates that the measurement was completed.
To avoid interference of the device status indicator with the measurement process, the device status
indicator is turned off during measurement.