EasyManua.ls Logo

X-Rite 301 - User Manual

X-Rite 301
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Questions and Answers

  • L
    Lori JacksonAug 9, 2025
    Why X-Rite Measuring Instruments display will not turn on?
    • L
      Logan CordovaAug 9, 2025
      If the display of your X-Rite Measuring Instruments unit does not turn on, it could be due to several reasons. First, the unit might not be nulled, so try nulling the unit. Another possibility is a blown fuse, in which case you should replace the fuse. Lastly, check for loose connectors and re-seat them.
  • A
    Amanda HopkinsAug 15, 2025
    What to do if X-Rite Measuring Instruments light source will not illuminate?
    • L
      Laura RobinsonAug 15, 2025
      If the light source on your X-Rite Measuring Instruments unit isn't illuminating, the possible causes include a blown fuse, which requires a fuse replacement. Alternatively, there might be loose connectors, so ensure you re-seat all connectors.
  • W
    William BishopAug 21, 2025
    Why X-Rite Measuring Instruments keeps blowing fuses?
    • D
      David JonesAug 21, 2025
      If your X-Rite (301) Measuring Instruments unit keeps blowing 500mA fuses or (301X) keeps blowing 400mA fuses, it may be because the fuse is loose in the holder. Try tightening the fuse holder.
  • T
    Tyler JonesAug 27, 2025
    What to do if X-Rite Measuring Instruments fluorescent bulb(s) will not illuminate?
    • B
      bgonzalezAug 27, 2025
      If the fluorescent bulb(s) in your X-Rite Measuring Instruments unit won't illuminate, check the following: * Loose bulb(s): Seat the bulb(s) properly. * Blown fuse: Replace the fuse. * Loose connector: Re-seat the connector. * Faulty bulb(s): Replace the bulb(s).
  • E
    elizabethbrownSep 2, 2025
    What to do if X-Rite Measuring Instruments reading will not change or hold?
    • C
      cynthiaporterSep 2, 2025
      If the reading on your X-Rite Measuring Instruments unit won't change or hold, the issue might be due to loose connectors. Try re-setting the connector.

Summary

Introduction to the Densitometer

Product Specifications

Detailed technical specifications including size, weight, range, and accuracy.

Operating Instructions: Initial Setup

Operating Instructions: Measurement Setup

Operating Instructions: Density Measurements

Calibration Procedures

Calibration Procedure Steps

Detailed steps for calibrating the densitometer.

Maintenance: Cleaning

Maintenance: Fluorescent Bulb Replacement

Maintenance: Reading Lamp Replacement

Maintenance: Fuse Replacement

Troubleshooting

Unit Keeps Blowing Fuses

Troubleshooting steps for fuses blowing repeatedly.

Unit Display and Null Issues

Resolving issues with the unit display and nulling function.

Light Source Illumination Issues

Diagnosing problems with the light source not illuminating.

Unit Nulling Problems

Troubleshooting steps when the unit fails to null.

Troubleshooting: Reading Issues

Fluorescent Bulb Illumination Issues

Troubleshooting when fluorescent bulbs do not illuminate.

Reading Stability and Changes

Resolving issues with readings not changing or holding.

Output Connection (301 RS)

X-Rite 301 Specifications

General IconGeneral
BrandX-Rite
Model301
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals