1515
1515
15
1414
1414
14
LL
LL
L
EARNINGEARNING
EARNINGEARNING
EARNING
Your UR74A Learning Remote has the
codes for most TVs, VCRs, etc. in its code
library. However, if the code for your
particular device is not found in the
library, you can learn these codes from
your existing remote. Or if you find a
code from the tables in this manual that
“almost” matches your device, but a few
buttons are missing, you can learn just
those buttons.
1.1.
1.1.
1. Point your existing
remote at the UR74A
Remote with a
distance of about 1
inch between
remotes.
2.2.
2.2.
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release the
Setup button.
3.3.
3.3.
3. Press the mode
button that matches
the equipment you
want to learn. The
LED blinks once.
4.4.
4.4.
4. Press and release the
LEARN button. The
LED blinks once.
5.5.
5.5.
5. Press and release the
button on the UR74A
Remote that you
want to teach. (e.g.
POWER) The LED
blinks once.
II
II
I
DENTIFYINGDENTIFYING
DENTIFYINGDENTIFYING
DENTIFYING
C C
C C
C
ODESODES
ODESODES
ODES
FOUNDFOUND
FOUNDFOUND
FOUND
USINGUSING
USINGUSING
USING
THETHE
THETHE
THE
SS
SS
S
EARCHEARCH
EARCHEARCH
EARCH
P P
P P
P
ROCEDUREROCEDURE
ROCEDUREROCEDURE
ROCEDURE
1.1.
1.1.
1. Press and hold the
SETUP until the LED
indicator lights
steadily. Release
Setup button.
2.2.
2.2.
2. Press the mode
button that matches
the equipment you
want to identify. The
LED blinks once.
3.3.
3.3.
3. Press and release
SETUP. The LED
blinks once.
4.4.
4.4.
4. To find the first digit,
press each number
button from 0 to 9
until the LED blinks.
The number you
pressed is the first
digit of the code.
5.5.
5.5.
5. Press each number
button from 0 to 9
again as above to
find the second digit.
6.6.
6.6.
6. Press each number
button in turn to find
the third digit. When
the third digit has
been found, the LED
goes out.
6.6.
6.6.
6. Press the button on
your existing remote
that you want to
learn. Hold the
button until the LED
on the UR74A
Remote blinks off.
To Next Page
Loading...
Need help?
General
