4
5
Dear Customer:
Thank you for deciding on purchasing this quality product from X4-TECH.
This instruction manual will give you a general idea of how this device operates, as well as pro-
vide you with information on cleaning and safety procedures. Please take a few minutes to
read and follow all safety and operating instructions found in this manual carefully, in order to
maintain this products condition and ensure safe operation.
Retain this instruction manual for future reference and pass it along with the device if handed
over to a third party. Should you have any additional questions regarding the operation or instal-
lation of this device or should any suggestions arise, please contract a specialized dealer or our
service team for further information.
We look forward to your recommending us to others and hope you enjoy using this ampli er
from X4-TECH.
Your X4-TECH Team
All company and product names mentioned in this document are registered trademarks of
their respective owners. All rights reserved.
We assume no liability for damage occurred as a result of improper use or damage resulting
from the failure to comply with the safety instructions found in this manual, improper operation
or handling! Under such circumstances, all claims under warranty will become void. We assume
no liability for consequential damage!
This product is EMV-certi ed and ful ls all European and National guideline requirements. A
declaration of CE conformity has been established for this product. Certi cation has been docu-
mented and entrusted to the manufacturer.
The X4-TECH hi- ampli er A-1200 is intended for the ampli cation of low-level audio signals
in home audio systems, which are intensi ed and transferred between signal sources and lou-
dspeakers.
› The ampli er should only be used with a low-level audio source.
› This ampli er is only authorized for connection to a AC 230 V~/50 Hz alternating voltage supply
and is intended for indoor use only.
› We recommend the use of this ampli er with other hi- products from X4-TECH.
Please adhere to all of the safety information/instructions found in this instruction
manual!
Explanation of symbols
An exclamation mark is intended to inform the user of important information, operati-
on or maintenance instructions or that special attention is required.
This symbol is intended to alert you to the presence of unprotected, live parts or com-
ponents found within the product’s enclosure or of dangerous connections that upon
contact may be of su cient magnitude to constitute a risk of electric shock. Cables
intended for such connections should only be connected by quali ed personnel or you
should only use ready to connect cables. There are no user-serviceable parts found in-
side the device, therefore the device is never to be opened.
1
Intended use
Chapter 1 Intended use
To Next Page
Loading...
