Safety Instructions
975-0395-01-01 1–3
This guide for use by qualified installers only
Safety Instructions
• Before you begin the installation, review the “Important Safety
Instructions” on page v, and read this entire “Installation” section so
you can plan your installation from beginning to end.
• Disconnect all AC and DC power sources to prevent accidental
shock. Disable and secure all AC and DC disconnect devices and
automatic generator starting devices.
Installation Codes
Governing installation codes vary depending on the specific location and
application of the installation. Some examples include the following:
• The U.S. National Electrical Code (NEC)
• The Canadian Electrical Code (CEC)
• The U.S. Code of Federal Regulations (CFRs)
• Canadian Standards Association (CSA) and the RV Industry
Association (RVIA) for installations in RVs
• The American Boating and Yachting Committee (ABYC) for Marine
installations in the U.S.
It is the installer’s responsibility to ensure that all applicable installation
requirements are met.
WARNING: Shock hazard
Xantrex Technology recommends that all wiring be done by a certified technician
or electrician to ensure adherence to the applicable electrical safety wiring
regulations.
FreedomHF_IC_01-Installation.fm Page 3 Monday, December 24, 2007 9:47 AM
To Next Page
Loading...
