To Next PageTo Next Page
Need help?Do you have a question about the Xantrex XDC 30-200 and is the answer not in the manual?
General| Output Voltage | 0-30 V |
|---|---|
| Output Current | 0-200 A |
| Input Voltage | 208/240 V AC |
| Power Rating | 6 kW |
| Input Frequency | 47-63 Hz |
| Voltage Resolution | 10 mV |
| Current Resolution | 100 mA |
| Cooling | Forced air |
| Ripple and Noise | <10mVrms |
| Operating Temperature | 0°C to 40°C |
| Interface | RS232 |
| Dimensions (W x H x D) | 483 x 133 x 470 mm |
| Peak Output Current | 220A (10ms) |
Experienced engineers offer full-service, in-house repair.
Contact your merchant or Xantrex directly for troubleshooting or warranty service.
Details safety precautions for high energy, high voltage, and hazardous environments.
Designed for users with basic electrical theory knowledge, especially power supply operation.
Introduces the XDC Series DC power supplies and their technology.
Describes the front panel components like display, knobs, and keypad.
Summarizes the essential steps for setting up the power supply.
Details the AC input connector and wiring specifications for safe connection.
Outlines procedures for power-on and front panel function checks.
Describes initial setup, powering on/off, and front panel control procedures.
Describes function keys, menu navigation, and control knobs for front panel operation.
Introduces remote operation via analog, RS-232, GPIB, and Multichannel interfaces.
Guides on sending commands via SCPI programming language over RS-232.
Configures power-on states like Factory Preset, Last Setting, User Setting, Auto Sequence.
Explains current sharing function for 6000 Watt units using CANbus interface.
Describes how to access calibration mode via front panel or SCPI command.
Provides a summary of SCPI commands supported by the power supply.
Explains command formats, syntax, punctuation, and abbreviations.
Explains how errors are queued and cleared based on IEEE 488.2 standards.
Lists IEEE 488.2 syntax errors detected by the parser.
Describes programming via GPIB interface, meeting IEEE 488.2 and SCPI standards.
Provides summary tables for output ratings, regulation, accuracy, and efficiency.
Defines electrical performance for output voltage, current, power, noise, and drift.
Provides physical dimensions for 6000W and 12000W units.
Alphabetical listing of topics covered in the manual.
