Disassembly and Reassembly
1. Remove the following:
- Covers 5.4.1 and OPE 5.4.1.1
- Scanner 5.11
2. Unplug the three connectors(USB, Speaker, Fan), as
shown below.
3. Remove the five screws securing the Middle Cover
Ass'y and then lift the Middle Cover Ass'y, as shown
below.
4. Remove the two screws securing the USB Host PBA
and remove it.
5. Remove the one screw securing the Speaker and
then release the Speaker, as shown below.
5.12 Middle Cover
DC Fan
Speaker
USB Host
Middle Cover Ass'y
USB Host PBA
Harness
Speaker
To Next Page
Loading...
