5
Power Connection
Two power specifications are listed below. The specifications that apply to your machine
depend on your machine configuration and the requirements in your country. Connect
the power plug only to a properly rated and grounded power outlet to avoid the chance
of electric shock. If in doubt, contact your Xerox Customer Support Center.
Refer to the Power Table located in the Appendix for electrical requirements and power
comsumptions.
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can cause connection problems over time.
Do not attempt to rework, pull, bend, chafe, or damage the power cord in any way. Do
not place heavy objects on the cord because that can also damage the cord.
Stop operation immediately if your machine produces smoke, excessive heat, unusual
noises or smells, or if water, coffee, or other liquids are spilled on the machine.
Immediately turn off the machine and unplug it. Then contact your Xerox Customer
Support Center.
5-1
Xerox
®
6279
®
Wide Format Solution
Safety Guide
To Next Page
Loading...
Need help?
General
