Xerox WorkCentre 6605

Other manuals for Xerox WorkCentre 6605

Service Manual662 pages

Hardware Installation Instructions17 pages

Quick Use Guide20 pages

Cartridge Replacement Instructions2 pages

Specification8 pages

Detailed Specifications4 pages

Installation Guide7 pages

Questions and Answers

J
John HallSep 12, 2025
Why Xerox All in One Printer does not turn on?
- P
  Penny WilliamsSep 12, 2025
  Your Xerox All in One Printer might not be turning on due to several reasons: * The power switch might not be turned on. In this case, turn on the switch. * The power cord may not be correctly plugged into the outlet. To fix this, turn off the printer power switch and plug the power cord securely into the outlet. * There could be something wrong with the outlet. Try plugging another electrical appliance into the outlet to see if it operates properly or try a different outlet. * The printer might be connected to an outlet with incorrect voltage or frequency. Use a power source with the correct specifications.
A
Ashley KingAug 23, 2025
What to do if Xerox WorkCentre 6605 resets or turns off frequently?
- D
  Debra GonzalezAug 23, 2025
  If your Xerox All in One Printer is frequently resetting or turning off, there are a few potential causes: * The power cord might not be properly connected. Turn off the printer, ensure the power cord is securely plugged into both the printer and the outlet, and then turn the printer back on. * A system error could have occurred. Turn the printer off and then on again. * The printer may be connected to an uninterruptible power supply. Turn off the printer and connect the power cord to a suitable outlet. * The printer could be connected to a power strip shared with other high-power devices. Plug the printer directly into the outlet or into a power strip that is not shared with other high-power devices.
L
Lindsey NunezAug 25, 2025
How to fix Xerox WorkCentre 6605 not turning on?
- G
  grayjeremyAug 26, 2025
  If your Xerox All in One Printer is not turning on, here are some things to check: * Ensure the power switch is turned on. * Make sure the power cord is correctly plugged into the outlet. Turn off the printer power switch, and plug the power cord securely into the outlet. * There might be something wrong with the outlet. Plug another electrical appliance into the outlet to see if it works, or try a different outlet. * The printer could be connected to an outlet with incorrect voltage or frequency. Use a power source that matches the specifications listed in the Electrical Specifications.
C
claudia16Aug 26, 2025
What causes automatic 2-sided printing problems on Xerox All in One Printer?
- M
  Melissa TrujilloAug 26, 2025
  Automatic 2-sided printing problems on your Xerox All in One Printer can arise from: * Unsupported or incorrect paper. Ensure you are using a supported paper size and weight for 2-sided printing. Note that envelopes and labels are not suitable for 2-sided printing. * An incorrect setting in the print driver. In the print driver Properties, select 2-Sided Print on the Paper/Output tab.
S
scott54Aug 27, 2025
Why Xerox WorkCentre 6605 All in One Printer resets or turns off frequently?
- A
  Ashley AndersonAug 27, 2025
  If your Xerox All in One Printer is frequently resetting or turning off, here are a few potential causes and solutions: * The power cord may not be plugged into the outlet correctly. Turn off the printer, ensure that the power cord is properly connected to both the printer and the outlet, and then turn the printer back on. * A system error might have occurred. Turn the printer off, then turn it on again. * The printer might be connected to an uninterruptible power supply. Turn off the printer, and then connect the power cord to a suitable outlet. * The printer could be connected to a power strip shared with other high-power devices. Plug the printer directly into the outlet or into a power strip that is not shared with other high-power devices.
L
Lisa MorganAug 30, 2025
How to resolve jams during automatic 2-sided printing on Xerox WorkCentre 6605 All in One Printer?
- M
  matajanetAug 30, 2025
  Jams during automatic 2-sided printing on your Xerox All in One Printer can be resolved by: * Using paper of the correct size, thickness, or type. * Loading the paper in the correct tray. * Loading the tray with only one type and size of paper.
W
whansenNov 27, 2025
What causes paper misfeeds in Xerox WorkCentre 6605?
- J
  Jason JonesDec 1, 2025
  Paper misfeeds in your Xerox All in One Printer can occur due to: * The paper not being correctly positioned in the tray. Remove the misfed paper and reposition it properly in the tray. Adjust the paper guides in the tray to match the size of the paper. * The paper tray being too full. Remove some of the paper, ensuring not to load paper past the fill line. * The paper guides not being correctly adjusted to the paper size. Adjust the paper guides in the tray to match the size of the paper. * The tray containing warped or wrinkled paper. Remove the paper, smooth it out, and reload it. If it still misfeeds, do not use that paper. * The paper being moist from humidity. Remove the moist paper and replace it with new, dry paper. * Using paper of the wrong size, thickness, or type. ...
T
Tracy WhiteSep 10, 2025
Why Xerox WorkCentre 6605 All in One Printer is making unusual noises?
- M
  Melissa OwensSep 10, 2025
  If your Xerox All in One Printer is making unusual noises, there might be an obstruction or debris inside the printer. Turn off the printer and remove any obstructions or debris.
A
Andrew YuSep 7, 2025
Why Xerox WorkCentre 6605 paper tray will not close?
- M
  monicacrosbySep 7, 2025
  If the paper tray of your Xerox All in One Printer will not close, consider the following: * The paper tray lift plate may not be locked down. Push down on the paper stack at the back of the tray until it locks down. * Some debris or an object might be blocking the tray. * The tray could be catching on the table or shelf it is on.
J
Jessica AustinSep 8, 2025
Why is there condensation inside my Xerox WorkCentre 6605?
- K
  Kelly GarzaSep 9, 2025
  Condensation inside your Xerox All in One Printer can occur due to: * The printer sitting in a cold room. Allow the printer to operate for several hours at room temperature. * High relative humidity in the room. Reduce the humidity or move the printer to a location with temperature and humidity within operating specifications.

Summary

Safety

Electrical Safety

Covers power cord, general guidelines, and emergency turn-off procedures for safe operation.

Operational Safety

Discusses guidelines for safe printer use, ozone release, and proper printer placement.

Maintenance Safety

Features

Parts of the Printer

Administrative Features

Covers advanced settings like CentreWare Internet Services, IP addresses, and user access.

Installation and Setup

Installation and Setup Overview

Provides a general overview of the steps required to install and set up the printer.

Connecting the Printer

Details various methods for connecting the printer, including USB and network options.

Configuring Network Settings

Explains TCP/IP addressing and network configuration for printer connectivity.

Assigning the Printer IP Address

Covers automatic and manual methods for assigning an IP address to the printer.

Paper and Media

Supported Paper

Loading Paper

Printing

Selecting Printing Options

Printing Features

Details advanced printing capabilities such as 2-sided printing, orientation, and watermarks.

Copying

Making Copies

Provides instructions on how to perform basic copying tasks using the printer's control panel.

Adjusting Copying Options

Changing the Default Copy Settings

Scanning

Loading Documents for Scanning

Scanning to a USB Flash Drive

Scanning to a Shared Folder on a Network Computer

Adjusting Scanning Settings

Faxing

Configuring the Printer for Faxing

Loading Documents for Faxing

Sending a Fax from the Printer

Explains how to send faxes directly from the printer's control panel.

Maintenance

Cleaning the Printer

Offers instructions for cleaning the printer's exterior, scanner, and interior components.

Adjustments and Maintenance Procedures

Troubleshooting

General Troubleshooting

Provides solutions for common printer issues like power, printing, and error messages.

Paper Jams

Explains how to locate, clear, and troubleshoot various types of paper jams.

Print-Quality Problems

Offers solutions for issues affecting print quality, such as faded colors or streaks.

Fax Problems

Xerox WorkCentre 6605 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	Up to 600 x 600 x 4 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	550 sheets
Maximum Paper Capacity	1, 250 sheets
Paper Output	250 sheets
Duplex Printing	Yes
Processor	533 MHz
Memory (Standard)	512 MB
Memory (Maximum)	1 GB
Monthly Duty Cycle	Up to 80, 000 pages
Type	Multifunction
Copy Speed	Up to 36 cpm black and color
Fax Resolution	300 x 300 dpi
Media Sizes	Letter, Legal, A4, A5, B5, Custom sizes
Connectivity	USB 2.0, Ethernet
Mobile Printing	Apple AirPrint
Operating System Compatibility	Windows, Mac, Linux
Dimensions (W x D x H)	500 mm
Weight	29.6 kg
Print Speed	Up to 36 ppm (Black) / Up to 36 ppm (Color)