Installation and Setup
WorkCentre 6605 Color Multifunction Printer 83
User Guide
Configuring Security Settings Using
CentreWare Internet Services
This section includes:
• Opening the Security Menu .................................................................................................. 83
• Configuring Administrative Security Settings ........................................................................ 83
• Configuring Secure Settings ................................................................................................. 84
• Configuring an LDAP Authentication System........................................................................ 85
• Configuring a Kerberos Authentication System .................................................................... 85
• Configuring LDAP Authentication ......................................................................................... 86
• Configuring the Host Access List .......................................................................................... 86
• Configuring IPsec Settings ................................................................................................... 88
• Configuring 802.1x Settings ................................................................................................. 89
• Configuring SSL Settings ..................................................................................................... 90
•
Configuring SMTP Domain Filtering ..................................................................................... 90
Use security settings to configure administrative settings, authentication, user access and privileges,
and service access.
Note: For details, see the Help in CentreWare Internet Services.
Opening the Security Menu
1. At your computer, open a Web browser, type the IP address of the printer in the address field,
then press Enter or Return.
2. In CentreWare Internet Services, click Properties.
3. In the Properties pane, to expand the menu, click the plus (+) symbol next to the Security folder.
Configuring Administrative Security Settings
1. At your computer, open a Web browser, type the IP address of the printer in the address field,
then press Enter or Return.
2. In CentreWare Internet Services, click Properties.
3. In the Properties pane, to expand the menu, click the plus (+) symbol next to the Security folder.
4. Click Administrator Security Settings.
5. To turn on administrator privileges, select Enable Administrator Mode.
6. Enter the user name and password, then re-enter the password.
7. Next to Access denial by the authentication failure of the Administrator, enter the number of
login attempts allowed before locking out the user.
8. Click Save Changes.
To Next Page
Loading...
Need help?
General
