EasyManuals Logo

Xerox WorkCentre 6605 User Manual

Xerox WorkCentre 6605
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #233 background imageLoading...
Page #233 background image
Troubleshooting
WorkCentre 6605 Color Multifunction Printer 233
User Guide
Printing Takes Too Long
Probable Causes Solutions
The printer is set to a slower printing mode,
for example, for printing on glossy or
heavyweight paper.
It takes more time to print on certain types of special paper.
Ensure that the paper type is set properly in the driver and at the
printer control panel. For details, see Print Speed on page 272.
The printer is in Energy Saver mode. Wait. It takes time for printing to start when the printer is coming
out of Energy Saver mode.
The way the printer was installed on the
network could be an issue.
Determine if a print spooler or a computer sharing the printer is
buffering all print jobs and then spooling them to the printer.
Spooling can slow print speeds. To test the speed of the printer,
print some information pages such as the Office Demo Page. If
the page does not print at the rated speed of the printer, you
could have a network or printer installation issue.
The job is complex. Wait. No action needed.
The print-quality mode in the driver is set to
Enhanced.
Change the print-quality mode in the print driver to Standard.
The printer quality is set to Photo and the
printer is being used for complex, 2-sided
print jobs.
Increase memory size to 1 GB RAM by installing the Productivity
Kit (Memory).
Document Prints From Wrong Tray
Probable Causes Solutions
Application and print driver have conflicting
tray selections.
1. Check the tray selected in the print driver.
2. Go to the page setup or printer settings of the application from
which you are printing.
3. Set the paper source to match the tray selected in the print
driver or set the paper source to Automatically Select.
Note: To have the print driver select the tray, set the tray used
as the paper source to Auto Selection Enabled.

Table of Contents

Other manuals for Xerox WorkCentre 6605

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 6605 and is the answer not in the manual?

Xerox WorkCentre 6605 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print ResolutionUp to 600 x 600 x 4 dpi
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Fax Speed33.6 Kbps
Standard Paper Capacity550 sheets
Maximum Paper Capacity1, 250 sheets
Paper Output250 sheets
Duplex PrintingYes
Processor533 MHz
Memory (Standard)512 MB
Memory (Maximum)1 GB
Monthly Duty CycleUp to 80, 000 pages
TypeMultifunction
Copy SpeedUp to 36 cpm black and color
Fax Resolution300 x 300 dpi
Media SizesLetter, Legal, A4, A5, B5, Custom sizes
ConnectivityUSB 2.0, Ethernet
Mobile PrintingApple AirPrint
Operating System CompatibilityWindows, Mac, Linux
Dimensions (W x D x H)500 mm
Weight29.6 kg
Print SpeedUp to 36 ppm (Black) / Up to 36 ppm (Color)

Related product manuals