Xerox WorkCentre 6605 User Manual

Troubleshooting
WorkCentre 6605 Color Multifunction Printer 257
User Guide
Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms Solutions
Lines or streaks only present in copies
made from the document feeder.
There is debris on the document glass. When scanning, the
paper from the document feeder passes over the debris creating
lines or streaks. Clean all glass surfaces with a lint-free cloth.
Spots present in copies taken from the
document glass.
There is debris on the document glass. When scanning, the
debris creates a spot on the image. Clean all glass surfaces with
a lint-free cloth.
The reverse side of the original is showing
on the copy or scan.
Turn on Background Suppression.
Image is too light or too dark. • Copy: Use the Image Quality settings to lighten, darken, or
adjust contrast.
• Scan: Use the Advanced Settings Tab to lighten, darken, or
adjust contrast.
Colors are inaccurate. • Copy: Use the Image Quality settings to adjust color balance.
• Scan: Confirm the correct Original Type is set.
If the problem persists, go to www.xerox.com/office/WC6605support for online support information.

Xerox WorkCentre 6605 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	Up to 600 x 600 x 4 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	550 sheets
Maximum Paper Capacity	1, 250 sheets
Paper Output	250 sheets
Duplex Printing	Yes
Processor	533 MHz
Memory (Standard)	512 MB
Memory (Maximum)	1 GB
Monthly Duty Cycle	Up to 80, 000 pages
Type	Multifunction
Copy Speed	Up to 36 cpm black and color
Fax Resolution	300 x 300 dpi
Media Sizes	Letter, Legal, A4, A5, B5, Custom sizes
Connectivity	USB 2.0, Ethernet
Mobile Printing	Apple AirPrint
Operating System Compatibility	Windows, Mac, Linux
Dimensions (W x D x H)	500 mm
Weight	29.6 kg
Print Speed	Up to 36 ppm (Black) / Up to 36 ppm (Color)