Xerox WorkCentre 6605 User Manual

Paper and Media
118 WorkCentre 6605 Color Multifunction Printer
User Guide
• For 1-sided printing, load letterhead or pre-printed face up with the top edge going into the
printer.
• For 2-sided printing, load letterhead and pre-printed face down with the top edge going into
the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
6. Adjust the width guides until they touch the edges of the paper.
7. If the control panel prompts you, verify the size and type on the screen. To make changes:
a. Touch Size, then touch an option for a standard paper size.
b. Touch Type, then touch an option for the paper type.
c. Touch OK.
Configuring Trays 1 or 2 for the Paper Length
You can adjust the lengths of Trays 1 and 2 to accommodate A4/Letter and Legal paper sizes. In the
Legal length settings, the trays protrude from the front of the printer.
To change the 550-Sheet Feeders in Trays 1 and 2 to match the paper length:
1. Remove all paper from the tray.
2. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.

Xerox WorkCentre 6605 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	Up to 600 x 600 x 4 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	550 sheets
Maximum Paper Capacity	1, 250 sheets
Paper Output	250 sheets
Duplex Printing	Yes
Processor	533 MHz
Memory (Standard)	512 MB
Memory (Maximum)	1 GB
Monthly Duty Cycle	Up to 80, 000 pages
Type	Multifunction
Copy Speed	Up to 36 cpm black and color
Fax Resolution	300 x 300 dpi
Media Sizes	Letter, Legal, A4, A5, B5, Custom sizes
Connectivity	USB 2.0, Ethernet
Mobile Printing	Apple AirPrint
Operating System Compatibility	Windows, Mac, Linux
Dimensions (W x D x H)	500 mm
Weight	29.6 kg
Print Speed	Up to 36 ppm (Black) / Up to 36 ppm (Color)