EasyManua.ls Logo

Xerox WorkCentre 6605

Xerox WorkCentre 6605
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and Setup
50 WorkCentre 6605 Color Multifunction Printer
User Guide
Configuring Network Settings
This section includes:
About TCP/IP and IP Addresses .......................................................................................... 50
About TCP/IP and IP Addresses
Computers and printers primarily use TCP/IP protocols to communicate over an Ethernet network.
Generally, Macintosh computers use either TCP/IP or the Bonjour protocol to communicate with a
network printer. For Macintosh OS X systems, TCP/IP is preferred. Unlike TCP/IP, however, Bonjour
does not require printers or computers to have IP addresses.
With TCP/IP protocols, each printer and computer must have a unique IP address. Many networks
and cable and DSL routers have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP
server automatically assigns an IP address to every computer and printer on the network that is
configured to use DHCP.
If you use a Cable or DSL router, see the documentation for your router for information on IP
addressing.

Table of Contents

Other manuals for Xerox WorkCentre 6605

Related product manuals