WELCOME 6
BASIC STEPS TO PRINT
The following section includes a basic workflow for setting up your Integrated Fiery Color
Server in order to print documents. It takes you from printing a Configuration page and
configuring Setup to installing printer drivers to print a job. Detailed instructions for all these
procedures are found in other documents in the user documentation set. For a summary of
supported Integrated Fiery Color Server documents, see page 4.
These instructions assume that a service technician has unpacked and connected the
Integrated Fiery Color Server and that the Integrated Fiery Color Server and digital press are
powered on. In some cases, initial print device settings may be required. See Configuration and
Setup.
The following steps assume that you are adding the Integrated Fiery Color Server to a TCP/IP
network that includes Windows XP user computers. Although this example is specific to a
Windows XP TCP/IP environment, users in other computer environments may also benefit
from these instructions.
To Next Page
Loading...
Need help?
General
